No need to drill and tap a rock-hard Springfield with this No-Drill, No-Tap Mount. No need to bend the bolt, a simple grinding of the bolt handle for clearance is all that’s needed. Blends in well with original finish. Will not fit the 1903/1903 Mark I.
SPECS: Alum., black, anodized. Uses standard Weaver-style 1" (2.5cm) rings, not supplied. Wt. 3 oz. (85 g). 5-5⁄16" (13.5cm) long.
Mer...
Ingen behov for å bore og gjenge en steinhard Springfield med denne No-Drill, No-Tap Mount. Det er ikke nødvendig å bøye bolten, en enkel sliping av bolthåndtaket for klaring er alt som trengs. Passer godt inn med original finish. Vil ikke passe til 1903/1903 Mark I.
SPECS: Alum., svart, anodisert. Bruker standard Weaver-stil 1" (2.5cm) ringer, ikke inkludert. Vekt 3 oz. (85 g). 5-5⁄16" (13.5cm) lang.
Mer...
Kundevurderinger for S&K 1903 A3 SPRINGFIELD DOVETAIL IN REAR (WEAVER)
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 4,8
Nice product(22.11.2011)
This no gunsmithing mount works as advertised but you may have to do minor trimming of the handguard as it will be too long "IF" you use the handguard retaining ring. Stock will also have to be notched slightly if you use the handguard retaining ring as the mount slightly pushes it forward. I bought an extra handguard and saved my original. You can find them cheap online.
Easy to install, secure(10.07.2012)
Easy to install on my Springfield M1903-A3. Had to use a dremmel on my stock to make the ring around the barrel for the front mount to fit. It was a synthetic stock so it only took 30 minutes to make it a nice fit. Fits very tight and secure.
every install is different(25.03.2013)
had to cut top foreend piece shorter,then fiqure a way to secure it to stock from moving side to side.
update on first review(31.03.2013)
I ended up reuseing the stock ring.With a little extra thought,I cut the upper portion of the stock about a quarter of an inch shorter,and used a dremmel tool to fit.Great tool!I bought Accushot Premium 1-inch Weaver Style See-Thru Medium Profile Rings.The bolt handle clears the scope by 3/16 inch.I installed a Tasco Varmint 2.5-10x 42mm True Mil-Dot Reticle,1/4 MOA Turrets Riflescope.Looks great.
Ease of installation(02.11.2013)
Mounted easy, great design! Brownell your the greatest too. Ordered this product at 3:00 on the 28th of Oct. Received it the 30th. Thanks for a great transaction!!!!!!!!!!!!!!!!!!!
s&k 03a3 mount(11.04.2015)
This is great product easy to install looks good on the rifle
Produktnr.: 794001033 S&K 1903 A3 SPRINGFIELD DOVETAIL IN REAR (WEAVER) Produsentnr.: 1570 Ingen behov for å bore og gjenge en steinhard Springfield med denne No-Drill, No-Tap Mount. Det er ikke nødvendig å bøye bolten, en enkel sliping av bolthåndtaket for klaring er alt som trengs. Passer godt inn med original finish. Vil ikke passe til 1903/1903 Mark I.
1749NOK4kr 1 749,00
*
Leveringstid ca. 14-21 dager. 4 stk. på lageret i USA
Spesifikasjoner:Farge: BlackMake: SpringfieldMaterial: AluminumModell: 03-A3Number of Bases: 1-PieceStyle: Weaver-Style Bases
Ingen boring eller gjenging kreves for å montere denne No-Drill, No-Tap Mount på en Springfield 03A3.
Passer godt med original finish og krever kun enkel sliping av bolthåndtaket for klaring.
Bruker standard Weaver-stil 1" ringer (ikke inkludert) og er laget av svart anodisert aluminium.
Attributes
Farge:
Black
Make:
Springfield
Material:
Aluminum
Modell:
03-A3
Number of Bases:
1-Piece
Style:
Weaver-Style Bases
Leveringsvekt: 0,136kgFrakthøyde: 25mmFraktbredde: 97mmFraktlengde: 173mm
Elementdetaljer
Made in USA
Oppdag S&K 03A3 Springfield Mount! 🏹 Ingen boring nødvendig, passer perfekt til din Springfield med original finish.
No need to drill and tap a rock-hard Springfield with this No-Drill, No-Tap Mount. No need to bend the bolt, a simple grinding of the bolt handle for clearance is all that’s needed. Blends in well with original finish. Will not fit the 1903/1903 Mark I.
SPECS: Alum., black, anodized. Uses standard Weaver-style 1" (2.5cm) rings, not supplied. Wt. 3 oz. (85 g). 5-5⁄16" (13.5cm) long.
Mer...
Ingen behov for å bore og gjenge en steinhard Springfield med denne No-Drill, No-Tap Mount. Det er ikke nødvendig å bøye bolten, en enkel sliping av bolthåndtaket for klaring er alt som trengs. Passer godt inn med original finish. Vil ikke passe til 1903/1903 Mark I.
SPECS: Alum., svart, anodisert. Bruker standard Weaver-stil 1" (2.5cm) ringer, ikke inkludert. Vekt 3 oz. (85 g). 5-5⁄16" (13.5cm) lang.
Mer...
Kundevurderinger for S&K 1903 A3 SPRINGFIELD DOVETAIL IN REAR (WEAVER)
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 4,8
Nice product(22.11.2011)
This no gunsmithing mount works as advertised but you may have to do minor trimming of the handguard as it will be too long "IF" you use the handguard retaining ring. Stock will also have to be notched slightly if you use the handguard retaining ring as the mount slightly pushes it forward. I bought an extra handguard and saved my original. You can find them cheap online.
Easy to install, secure(10.07.2012)
Easy to install on my Springfield M1903-A3. Had to use a dremmel on my stock to make the ring around the barrel for the front mount to fit. It was a synthetic stock so it only took 30 minutes to make it a nice fit. Fits very tight and secure.
every install is different(25.03.2013)
had to cut top foreend piece shorter,then fiqure a way to secure it to stock from moving side to side.
update on first review(31.03.2013)
I ended up reuseing the stock ring.With a little extra thought,I cut the upper portion of the stock about a quarter of an inch shorter,and used a dremmel tool to fit.Great tool!I bought Accushot Premium 1-inch Weaver Style See-Thru Medium Profile Rings.The bolt handle clears the scope by 3/16 inch.I installed a Tasco Varmint 2.5-10x 42mm True Mil-Dot Reticle,1/4 MOA Turrets Riflescope.Looks great.
Ease of installation(02.11.2013)
Mounted easy, great design! Brownell your the greatest too. Ordered this product at 3:00 on the 28th of Oct. Received it the 30th. Thanks for a great transaction!!!!!!!!!!!!!!!!!!!
s&k 03a3 mount(11.04.2015)
This is great product easy to install looks good on the rifle