BROWNELLS
MAUSER 98 BOLT SHROUD

078100098

Classy Way To Streamline 98's & Swedes

Finish off that sporterized military Mauser by replacing the ugly, issue shroud with this streamlined, classy, commercial-style shroud. Greatly improves looks of the bolt and eliminates the awkward, over-the-top, military safety. Since the original safety is removed, you must INSTALL A TRIGGER WITH ITS OWN SAFETY (like the Timney).

SPECS: 2¼" (5.7cm) long, 1¼" (3.2cm) wide. 2 oz. (56.7g) Investment cast steel, beaded finish. Large Ring fits all M98's.

Mer...

Stilig måte å strømlinjeforme 98'ere & Svensker på

Fullfør den sporteriserte militære Mauseren ved å erstatte den stygge, standard skjoldet med dette strømlinjeformede, stilige, kommersielle skjoldet. Forbedrer betraktelig utseendet på sluttstykket og eliminerer den klønete, over-the-top, militære sikringen. Siden den originale sikringen blir fjernet, må du MONTERE EN AVTREKKER MED EGEN SIKRING (som Timney).

SPECS: 2¼" (5.7cm) lang, 1¼" (3.2cm) bred. 2 oz. (56.7g) Investeringstøpt stål, perlet finish. Stor Ring passer til alle M98's.

Mer...

Kundevurderinger for BROWNELLS LARGE RING MAUSER BOLT SHROUD

Antall vurderinger: 4
Fra brownells.com: 4
Gjennomsnittsvurdering: 2

Not for beginners (25.07.2010)

I do a lot of custom Mauser rifle builds and the American Rifle Works and Sunny Hill shrouds weren't available, so I gave this a try. This part required almost two and a half hours of hand work and internal polishing/mating of parts to get it to work. The only thing positive I can say is that the process required me to go ahead and completely go through the bolt and polish and detail everything out, which will improve smoothness of function and lock time in the end, but that's an additional cost that will eventually end up attached to any rifle I produce with this part that won't be specified by a customer. Unacceptable,

part quality (29.01.2016)

The only reason I gave it one star is because they did not have a Zero. I do not have any problem with fitting parts, that's what a gunsmith does, This part was not machined well after casting. The front shoulder was left about .040" long, stopping the bolt lugs from locking up. This area should have a gap of about .020" and is not critical to function to be tight. I would need to make a mandrel to hold in the lathe to make it come close. I just found it to much time to make a mandrel for only 1 shroud that I have ever had to fit like this.

Read reviews first. (29.07.2016)

In my haste to find a bolt shroud, I went no further than the product description. This is no drop in part. Will require machining, polishing, etc., for proper fit. Bolt lugs will not lock up without excessive force which is not acceptable.

Only for the experienced (04.04.2017)

After reading the initial reviews I was sceptical about this product but not being able to find another option I figured I would give it a try. The finish was s little ruff but not terrible. Fitting wasn't an issue I spent about 30 minutes doing minor fitting and it worked flawles. I wouldn't recommend this part to any one who is not familiar with the operations of this rifle or fitting parts. In final works well and took s nice cold blue. My customer was very pleased.

Les 4 flere anmeldelser fra brownells.com

0 0 1 NOK

Produktnr.: 078100098
BROWNELLS LARGE RING MAUSER BOLT SHROUD
Produsentnr.: 330 Fullfør den sporteriserte militære Mauseren ved å erstatte den stygge, standard skjoldet med dette strømlinjeformede, stilige, kommersielle skjoldet. Forbedrer betraktelig utseendet på sluttstykket og eliminerer den klønete, over-the-top, militære sikringen. Siden den originale sikringen blir fjernet, må du MONTERE EN AVTREKKER MED EGEN SIKRING (som Timney).

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Make: Mauser Modell: 98

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Forbedrer utseendet på Mauser 98 ved å erstatte det originale bolt shroud med en strømlinjeformet, kommersiell versjon.
Eliminerer den klønete, militære sikringen, men krever installasjon av en avtrekker med egen sikring, som Timney.
Laget av investeringstøpt stål med perlet finish, passer til alle M98's.