The Strike Ambush 45-Degree Optic Mount gives you a modular dual mounting plate design which covers just about all mainstream red dots on the market. When you want to run a dual optic setup and have a close distance Mini/Micro Red Dot Sight (MRDS) with a Low Power Variable Optic (LPVO) scope, this 45-degree optic mount is a low-profile and high-strength accessory without forcing you to pick only one red dot you have to pair it up with. The 45-degree angle should get you out of the way of most LPVO scopes along with two mounting positions to pick from on the SI Multi-Optic Mount side. Easily place a MRDS alongside a LPVO with the low-profile SI-Ambush Picatinny rail mount that either sits flush with the top of the Pic rail or slightly below making it easier to sit under a scope or scope mount. The Strike Ambush 45 comes with a dual footprint mounting plate which has the SI Multi-Optic Mount on one side and the Aimpoint® Micro Standard footprint for T-1/T-2 compatible red dots on the other side making this a new innovative modular option for a diverse market. The SUS630 hardened stainless steel Picatinny rail mount is ambidextrous for either side. The 6061-T6 aluminum mounting plate can be flipped to select which MRDS but also oriented to work with the right or left side of the Pic rail. Fitment for one or fitment for almost all MRDS’ on the market, the Strike Ambush 45-Degree Optic Mount gives you a simple, compact and modular just about all-in-one solution. Package Contents: x1 Strike Ambush 45-degree mount (fully assembled) x1 Strike double sided optic plate x2 Screw for optic plate to mount [M3x10mm T10 Flat] x4 Screw for Aimpoint Micro Standard [M3x7mm T10 Rounded] x3 Screw [M3x8mm T10 Flat] x3 Screw [M3x9mm T10 Flat] x3 Screw [M3x10mm T10 Flat] x3 Screw [M3x8mm T14 Flat] x3 Screw [M3x8mm T15 Flat] x3 Screw [M3x8mm T10 Rounded] x3 Screw [M3x10mm T10 Rounded] x3 Screw [M3x11mm T11 Rounded] x5 Large mounting post x5 Small mounting post x5 Shallow mounting post x3 Tall mounting post x1 Torx tool [T10] x1 Torx tool [T25] x1 Loctite® Threadlocker Blue 243® x1 Multi-Optic Mount card -x1 Warning card Product Features: 45-degree offset Dual footprint mounting plate with SI Multi-Optic Mount and Aimpoint® Micro Standard Ambidextrous for either side Two mounting positions to pick from on SI Multi-Optic Mount side SI-AMBUSH low-profile mounting system The Strike Industries LINK Cobra Fore Grip with Cable Management is the evolution of the original SI Cobra Tactical Fore Grip which was developed for the shooter to use different grip techniques and allow the user to have a secure and comfortable grip in any situation or position. Designed to offer a barricade stop functionality with ridged face which prevents any sliding during shooting when braced against a table or wall. This version of the Cobra Fore Grip utilizes our patented SI LINK system which allows mounting onto both M-LOK and KeyMod compatible devices. The uniqueness of this handguard accessory does not just stop with the attachment. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. Shooters from all walks of life and different size hands can use the SI Cobra Fore Grip without worrying if the grip is too big or the angle would be too aggressive that it would strain your hand. The Strike Industries LINK Cobra Fore Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material that gives multiple ergonomic grip options for better weapon manipulation control. Package Contents: x1 Link Cobra Fore Grip with Cable Management x2 Screw x2 Nut x1 Torx key [T20] x1 Loctite® Threadlocker Blue 243® x1 Warning card Product Features: Patented SI LINK mounting system (M-LOK and KeyMod compatible) Built-in SI Cable Management System® (CMS) w/ excess wire storage (patent pending) Cables can be routed: alongside, across, 90-degrees or U-shape Multiple ergonomic grip options for better weapon manipulation control Designed to offer a barricade stop functionality with ridged face Lightweight High-strength impact resistant custom blended SI Polymer Extreme material COMPATIBILITY: M-LOK and KeyMod NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm. Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws DISCLAIMER: Always check with your state and local laws. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Strike Industries LINK Cobra Fore Grip med kabelhåndtering er utviklingen av den originale SI Cobra taktiske forgriperen, som ble utviklet for skyttere som ønsker å bruke ulike grepsteknikker og gi brukeren et sikkert og komfortabelt grep i enhver situasjon eller posisjon. Designet for å tilby en barrikadestopp-funksjonalitet med en rugglet overflate som forhindrer glidning under skyting når den støttes mot et bord eller vegg. Denne versjonen av Cobra forgriperen benytter vårt patenterte SI LINK-system som tillater montering på både M-LOK og KeyMod-kompatible enheter. Unikheten til dette håndbeskyttelsesutstyret stopper ikke bare ved festingen. Også inkludert er det patentpending SI Cable Management System® (CMS) som gjør at du kan organisere og lagre overflødig kabel fra våpenlyset eller andre kablede tilbehør. Kabler kan ledes langs håndbeskyttelsen, over til den andre siden, 90 grader eller U-form. Skyttere fra alle samfunnslag og med forskjellige håndstørrelser kan bruke SI Cobra forgriperen uten å bekymre seg for om grepet er for stort eller om vinkelen er for aggressiv, noe som kan belaste hånden din. Strike Industries LINK Cobra Fore Grip med kabelhåndtering er laget av et lett, høystyrke, støtbestandig, spesialblandet SI Polymer Extreme-materiale som gir flere ergonomiske grepalternativer for bedre våpenmanipulasjonskontroll. Pakkeinnhold: x1 Link Cobra Fore Grip med kabelhåndtering x2 Skrue x2 Mutter x1 Torx-nøkkel [T20] x1 Loctite® Threadlocker Blue 243® x1 Advarselskort Produktfunksjoner: Patenterte SI LINK monteringssystem (M-LOK og KeyMod kompatible) Innebygd SI Cable Management System® (CMS) med lagring av overflødig kabel (patentpending) Kabler kan ledes: langs, over, 90 grader eller U-form Flere ergonomiske grepalternativer for bedre våpenmanipulasjonskontroll Designet for å tilby en barrikadestopp-funksjonalitet med rugglet overflate Lett Høystyrke, støtbestandig spesialblandet SI Polymer Extreme-materiale KOMPATIBILITET: M-LOK og KeyMod OBS: LINK-skruer og muttere som følger med er ikke produsert av Strike Industries. Vennligst utfør rutinemessige kontroller for å sikre at skruene og mutterne er sikre som en del av det forebyggende vedlikeholdet av våpenet. Moment: Ikke overskrid 20 in/lbs (2.26 nM) for LINK-skruene. FRASKRIVELSE: Sjekk alltid med statlige og lokale lover. -KALIFORNIA PROPOSITION 65 ADVARSEL:- ADVARSEL: Dette produktet inneholder kjemikalier som er kjent for staten California å forårsake kreft og fødselsskader eller andre reproduktive skader. For mer informasjon: www.P65Warnings.ca.gov
Hjelp og kontakt
Nyhetsbrev
Klassisk visning
Mobilvisning