Min side (Logg inn)
Din handlekurv er tom.
0
Handlekurv
telefon Hjelp og kontakt
Gratis frakt over kr 3000
100-dagers returrett
Min side (Logg inn)
Hurtigliste
Din handlekurv er tom. (0)
Handlekurv
Nyhetsbrev Nyhetsbrev
Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

Hjem Deler til håndvåpen Rekyldeler Rekylfjærguide KIDD INNOVATIVE DESIGN GUIDE ROD & SPRING KIT FOR RUGER 10/22 Support
crazy tactical mug
810132050060 430109375
Upgrade the bolt handle assembly in the 10/22® Slick guide rod for easy racking Interchangeable tuning springs:(White=standard, Red=10% increase, Green=10% decrease) This great upgrade kit for your 10/22® will provide you with a comfortable bolt handle to grasp, a "super slick" guide rod, and the ability to tune the recoil of your rifle with our interchangeable springs. All bolt handle lengths are 1 3/4", which is 1/4" longer than the factory bolt handle assembly kit giving greater clearance for the shooter's knuckles while racking the bolt.   The three tuning springs come in varying tensions for the ultimate in tuning capability. Though by and large the standard tension spring will serve the shooter throughout the different ammunition velocities. If, due to tolerance stacking or preferred ammunition the cycling of the action is out of sync then the shooter has the capability to change the spring without using the more primitive method of cutting coils to tune a spring. Handle Weights: black 762 (modified z shape flute)= .3 oz Precision ground guide rod is made from hardened tool steel and held to 2/10,000" tolerance throughout its entire length. The rod is nitride treated which gives its surface a 70C rockwell (harder than a file) surface hardness. Guaranteed the smoothest and slickest guide rod in the industry.   Packaging Includes: bolt handle guide rod 3 tuning springs Installation instructions:   After removing the stock from the barreled action, remove the trigger and bolt stop. This will allow the needed clearance for the bolt to be removed along with the bolt handle assembly. After choosing your proper spring tension slip the bolt handle assembly in from the ejection port, placing the cone end of the rod into the containment hole in the receiver. Then fully compress the bolt handle assembly while placing the bolt on it. After the mating of the bolt handle and bolt, let off the containment allowing the bolt to go forward. Install the bolt stop pin, trigger and stock. The video below offers some of the finer installation points.
Mer...
399 399 1 NOK
Produktnr.: 430109375
KIDD INNOVATIVE DESIGN GUIDE ROD AND SPRING KIT FOR RUGER 10/22 LR
Produsentnr.: KIDD-22GRSK 810132050060
399 NOK 0 kr 399,00 *
Varsle ved tilgjengelighet
Utsolgt. Ingen leveringsdato kjent.
Spesifikasjoner: Make: Ruger, Brownells Modell: 10/22, BRN-22
Still spørsmål

Attributes

Make: Brownells,Ruger Modell: 10/22,BRN-22 Leveringsvekt: 0,023kg Frakthøyde: 19mm Fraktbredde: 19mm Fraktlengde: 159mm UPC : 810132050060

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x



Oppdag GUIDE ROD & SPRING KIT for Ruger 10/22 LR! 🔧 Optimal ytelse med KIDDs innovative design. Få ditt nå!

Upgrade the bolt handle assembly in the 10/22® Slick guide rod for easy racking Interchangeable tuning springs:(White=standard, Red=10% increase, Green=10% decrease) This great upgrade kit for your 10/22® will provide you with a comfortable bolt handle to grasp, a "super slick" guide rod, and the ability to tune the recoil of your rifle with our interchangeable springs. All bolt handle lengths are 1 3/4", which is 1/4" longer than the factory bolt handle assembly kit giving greater clearance for the shooter's knuckles while racking the bolt.   The three tuning springs come in varying tensions for the ultimate in tuning capability. Though by and large the standard tension spring will serve the shooter throughout the different ammunition velocities. If, due to tolerance stacking or preferred ammunition the cycling of the action is out of sync then the shooter has the capability to change the spring without using the more primitive method of cutting coils to tune a spring. Handle Weights: black 762 (modified z shape flute)= .3 oz Precision ground guide rod is made from hardened tool steel and held to 2/10,000" tolerance throughout its entire length. The rod is nitride treated which gives its surface a 70C rockwell (harder than a file) surface hardness. Guaranteed the smoothest and slickest guide rod in the industry.   Packaging Includes: bolt handle guide rod 3 tuning springs Installation instructions:   After removing the stock from the barreled action, remove the trigger and bolt stop. This will allow the needed clearance for the bolt to be removed along with the bolt handle assembly. After choosing your proper spring tension slip the bolt handle assembly in from the ejection port, placing the cone end of the rod into the containment hole in the receiver. Then fully compress the bolt handle assembly while placing the bolt on it. After the mating of the bolt handle and bolt, let off the containment allowing the bolt to go forward. Install the bolt stop pin, trigger and stock. The video below offers some of the finer installation points.
Mer...
Oppgrader din Ruger 10/22® med Volquartsen bolt release! 🔧 Enklere skyting uten tilpasning. Perfekt for presisjon og ytelse.
VOLQUARTSEN
VOLQUARTSEN BLUE 10/22® BOLT RELEASE
RUGER® 10/22® BOLT RELEASE
 
4,6
Kommer til lager
kr 339,00
Oppgrader din Ruger 10/22 med POWER CUSTOMs presise ejector ⚙️ for pålitelig hylseutkast. Styrke og holdbarhet i A-2 verktøystål.
POWER CUSTOM
POWER CUSTOM EJECTOR FOR RUGER® 10/22®
10/22® EJECTOR
Utskyter
0
På lager
kr 499,00
NETTSTEDSKART
PRODUKTKATEGORIER
BESTILLING
KUNDE SERVICE

Koble til

Sikre betalingsmåter

VisaMasterCard 

Bransjeorganisasjoner

SAAMI

Velkommen!

til Brownells Norge, ditt reisemål for alt relatert til skytevåpen. Med våre røtter i en ekte lidenskap for skytevåpen, bringer vi deg et uslåelig utvalg av våpendeler, tilbehør til skytevåpen, verktøy for våpensmeder, kikkerter og rødpunktsikter, samt ekspertkunnskap.

Enten du ønsker å vedlikeholde, reparere eller oppgradere, har vi det du trenger!

For skyttere, av skyttere
Vi deler din entusiasme og vet nøyaktig hva du ser etter, fordi vi er en del av fellesskapet.

Stort utvalg
Fra det essensielle til det unike, finn alt under ett tak.

Vår blanding av tradisjon og innovasjon
Handle med moderne teknologi, støttet av en arv av erfaring.

Utforsk vår kolleksjon og oppdag hvorfor vi er det betrodde navnet innen skytesport og jakt.

Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Brownells Switzerland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Brownells France - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. Brownells Sverige - Världens största leverantör av Vapendelar, Vapensmide Verktyg & Skyttetillbehör Brownells Suomi Brownells Italia - Il negozio del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Brownells Polska - Największy na świecie dostawca części broni, narzędzi rusznikarskich & akcesoriów strzeleckich Brownells Česko - Největší světový dodavatel součástí zbraní, střeleckého příslušenství a zbrojního nářadí
*
Priser inkl. mva. pluss levering

© 2024 Brownells Norge
Part of the Brownells Europe Group

Logo Brownells
Klassisk visningKlassisk visning MobilvisningMobilvisning
Tilbake til toppen