Vertical Forend Grip With Built-In Quick-Deploy Bipod
Vertical grip with quick-deploy bipod legs is an economical alternative for applications where the original GPS-02 Grip Pod’s function and benefits are desired, but the steel reinforcements in its legs are excess to requirements. The GPS-LE (Law Enforcement) locks to the bottom accessory rail of your tactical rifle’s forend, just like the GPS-02, to provide the same enhanced control during CQB and a stable bipod rest for precise long-range fire. The grip’s hand-filling contours and deep grooves provide a solid purchase even when your hands are wet. Hit the large, deeply grooved release button, and a powerful spring deploys the legs instantly. Conveniently placed for thumb activation, the button sits flush with the surrounding surface to prevent accidental deployment. Extended legs provide sufficient elevation for a standard 30-round magazine to clear the ground, and will not snag on brush, vehicle interior, or other gear when retracted. Legs and grip are made of tough, injection-molded polymer; steel cross-bolt with easy-grip thumbscrew locks directly to any MIL-STD 1913 Picatinny rail to ensure a rock-solid fit. Accepts GPRS1 and GPRS2 bolt-on accessory rails, available separately. May be used on many non-AR rifles and light machine guns with forend accessory rails.
SPECS: Reinforced polymer, black. 6¼” (15.9cm) long with legs retracted. 8½” (21.6cm) high with legs extended. 13⁄8" (3.5cm) diameter. 7 oz. (197g).
Mer...
Vertikalt fortrekksgrep med innebygd hurtigutløsende bipod
Vertikalt grep med hurtigutløsende bipod-ben er et økonomisk alternativ for situasjoner hvor den originale GPS-02 Grip Pod's funksjon og fordeler er ønsket, men stålfôringene i bena er overflødige. GPS-LE (Law Enforcement) låses fast til den nederste tilbehørsskinnen på fortrekket til din taktiske rifle, akkurat som GPS-02, for å tilby den samme forbedrede kontrollen under CQB og en stabil bipod-hvile for presis skyting på lang avstand. Grepet har fyllende konturer og dype riller som gir et solid grep selv når hendene er våte. Trykk på den store, dypt riflete utløserknappen, og en kraftig fjær utløser bena umiddelbart. Praktisk plassert for aktivering med tommelen, knappen ligger i flukt med den omkringliggende overflaten for å forhindre utilsiktet utløsning. Utslåtte ben gir tilstrekkelig høyde for at et standard 30-runders magasin skal klare seg over bakken, og vil ikke hekte seg fast i busker, kjøretøyets interiør, eller annet utstyr når de er trukket inn. Ben og grep er laget av solid, sprøytestøpt polymer; stål tverrbolt med lettgrep tommelskrue låser direkte til hvilken som helst MIL-STD 1913 Picatinny-skinne for å sikre en steinhard passform. Aksepterer GPRS1 og GPRS2 bolt-on tilbehørsskinner, tilgjengelig separat. Kan brukes på mange ikke-AR rifler og lette maskingevær med fortrekk tilbehørsskinner.
SPECS: Forsterket polymer, svart. 6¼” (15.9cm) lang med inntrukne ben. 8½” (21.6cm) høy med utslåtte ben. 13⁄8" (3.5cm) i diameter. 7 oz. (197g).
Mer...
Kundevurderinger for G.P.S. LE MODEL GRIP POD PICATINNY MOUNT 6.25-8.5" BLACK
Antall vurderinger: 11
Fra brownells.com: 11
Gjennomsnittsvurdering: 4,8
Great Product!(09.09.2010)
I love my Grip Pod. Very quick to deploy and the gun is very stable. I used a Harris bipod before getting the Grip Pod. The gun is just as easy to shoot off of the Grip Pod and it weighs much less than the Harris.
Plus, it looks cool, and that's also important!
quick, easy, and fun!(17.09.2010)
I was first issued the grip pod for a 2008 deployment to Iraq, and have now deployed twice with it. Having a single piece of gear that can fill 2 roles very well is a no brainer for most. The grip pod mounts very easily, requiring no tools, just a simple plastic wing nut that does not protrude to much. the front and back of the grip are ribbes for exrta gripping, while the sides are flat to accomodate pressure pads for light, lasers, ets. The release button for the bipods is idealy located in line with the barrel at the top of the grip, in perfect thumb position. A simple push and the two legs rapidly shoot out and spread (its great fun to "pop" the legs onto a sleeping Marine when boredon sets in!).
Now, be advised, the grip pod is rather large by other verticle for grip standards. I found the extra girth to be comforting on long patrols, and the extra length came in handy too after long hours.
I have never been a fan of bipods on patrol rifles, they always get in the way when deployed, they rattle, and if they are stowed they cannot be rapidly deployed. The grip pod solves all of these problems, as you can easily deploy with the push of a button while dropping to the prone.
As with all gear, the grip pod requires periodic dissasembly and cleaning, or the feet will not fully deploy when in a dusty environment.
All in all, an excellend piece of gear that I will gladly purchase again and would highly recomend to anyone.
It's a trade off(09.11.2009)
This is a very well made product that is durable and locks up tight.
It is a bit fat compared to most forward grips. The bipod is not adjustable. It is nice because you can set your rifle down without laying it on it's side.
While I like mine and have it on a heavv barreled AR I feel that it puts the shooter a bit high. This would create an undesirable silohette if used in a combat situation.
Bottom line it has it's purpose but it's not a real bipod and sort of a clumsy grip
Fantastic Bi-Pod(24.03.2010)
Made Like No Other! First Quality Auto Bi Pod. Very Stable and well made. Love the versatility of this product. Use it with all AR's . Would recommend over folding spring bi pod.
Great Product!(18.06.2010)
This is a well designed and sturdily constructed product. The legs deploy with a push of a button and retract simply by pushing them up into the grip. They lock automatically once they are in place. The bipod legs are steel lined and the hinge is also steel. The legs are stable when deployed, and are the correct height when shooting from the bench. The feet are wide enough to resist sinking into the ground when shooting prone. I like this product.
Combat Proven(17.07.2010)
Unlike the cheaper Knock-Offs this works. The US Army just ordered 250,000. For Police and Military, this provides an excellent shooting platform for rapid engagement from car hoods, or short walls. Not meant to compete with fold down benchrest bipods, so they shouldn't be compared to them. Durable, and sturdy.
Sturdy forward grip/ bipod(06.11.2011)
great for rapid deployment of a bipop, and to rest your rifle on the shooting bemch. it just feels sturdy in your hand, instead of some others that you can tell are just cheap.
love it(09.02.2012)
i have a grip pod on my ruger 1022 with a ATI folding stock it make the gun look and feel tuff
There is nothing like this(02.05.2012)
Only a serious Goof would give this 3 stars! This is an absulte must on a Ar 15 platform. Eliminates the need for both a BiPod and a Grip on the same weapon. Built tough and solid, quick release of BiPod is perfect. abilty to shoot while holding on to the BiPod lends itself more accurate shot, if you ever need it in a standing position this is much more comfortable intsead of grabbing barrel assembly.
A must have for AR-15 Optics(26.08.2012)
If your AR-15 has optics, then you need the Grip Pod. Your have vertical grip for quick movement and muzzle control and you have a bi-pod that allows for excellent mid to long range accuracy. This may be the moderate duty version but it is heavy, well made and very durable. I would not hesitate to take into action.
Very convenient on a tactical(12.04.2013)
This is my second grip pod. They are very ergonomic for a standing shot and work well from a bench rest. The quality is very good with the metal reinforcement.
Produktnr.: 100003633 G.P.S. LE MODEL GRIP POD PICATINNY MOUNT 6.25-8.5" BLACK Produsentnr.: GPS-LE793573782915 Vertikalt grep med hurtigutløsende bipod-ben er et økonomisk alternativ for situasjoner hvor den originale GPS-02 Grip Pod's funksjon og fordeler er ønsket, men stålfôringene i bena er overflødige. GPS-LE (Law Enforcement) låses fast til den nederste tilbehørsskinnen på fortrekket til din taktiske rifle, akkurat som GPS-02, for å tilby den samme forbedrede kontrollen under CQB og en stabil bipod-hvile for presis skyting på lang avstand. Grepet har fyllende konturer og dype riller som gir et solid grep selv når hendene er våte. Trykk på den store, dypt riflete utløserknappen, og en kraftig fjær utløser bena umiddelbart. Praktisk plassert for aktivering med tommelen, knappen ligger i flukt med den omkringliggende overflaten for å forhindre utilsiktet utløsning. Utslåtte ben gir tilstrekkelig høyde for at et standard 30-runders magasin skal klare seg over bakken, og vil ikke hekte seg fast i busker, kjøretøyets interiør, eller annet utstyr når de er trukket inn. Ben og grep er laget av solid, sprøytestøpt polymer; stål tverrbolt med lettgrep tommelskrue låser direkte til hvilken som helst MIL-STD 1913 Picatinny-skinne for å sikre en steinhard passform. Aksepterer GPRS1 og GPRS2 bolt-on tilbehørsskinner, tilgjengelig separat. Kan brukes på mange ikke-AR rifler og lette maskingevær med fortrekk tilbehørsskinner.
2349NOK0kr 2 349,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Vertical Forend Grip With Built-In Quick-Deploy Bipod
Vertical grip with quick-deploy bipod legs is an economical alternative for applications where the original GPS-02 Grip Pod’s function and benefits are desired, but the steel reinforcements in its legs are excess to requirements. The GPS-LE (Law Enforcement) locks to the bottom accessory rail of your tactical rifle’s forend, just like the GPS-02, to provide the same enhanced control during CQB and a stable bipod rest for precise long-range fire. The grip’s hand-filling contours and deep grooves provide a solid purchase even when your hands are wet. Hit the large, deeply grooved release button, and a powerful spring deploys the legs instantly. Conveniently placed for thumb activation, the button sits flush with the surrounding surface to prevent accidental deployment. Extended legs provide sufficient elevation for a standard 30-round magazine to clear the ground, and will not snag on brush, vehicle interior, or other gear when retracted. Legs and grip are made of tough, injection-molded polymer; steel cross-bolt with easy-grip thumbscrew locks directly to any MIL-STD 1913 Picatinny rail to ensure a rock-solid fit. Accepts GPRS1 and GPRS2 bolt-on accessory rails, available separately. May be used on many non-AR rifles and light machine guns with forend accessory rails.
SPECS: Reinforced polymer, black. 6¼” (15.9cm) long with legs retracted. 8½” (21.6cm) high with legs extended. 13⁄8" (3.5cm) diameter. 7 oz. (197g).
Mer...
Vertikalt fortrekksgrep med innebygd hurtigutløsende bipod
Vertikalt grep med hurtigutløsende bipod-ben er et økonomisk alternativ for situasjoner hvor den originale GPS-02 Grip Pod's funksjon og fordeler er ønsket, men stålfôringene i bena er overflødige. GPS-LE (Law Enforcement) låses fast til den nederste tilbehørsskinnen på fortrekket til din taktiske rifle, akkurat som GPS-02, for å tilby den samme forbedrede kontrollen under CQB og en stabil bipod-hvile for presis skyting på lang avstand. Grepet har fyllende konturer og dype riller som gir et solid grep selv når hendene er våte. Trykk på den store, dypt riflete utløserknappen, og en kraftig fjær utløser bena umiddelbart. Praktisk plassert for aktivering med tommelen, knappen ligger i flukt med den omkringliggende overflaten for å forhindre utilsiktet utløsning. Utslåtte ben gir tilstrekkelig høyde for at et standard 30-runders magasin skal klare seg over bakken, og vil ikke hekte seg fast i busker, kjøretøyets interiør, eller annet utstyr når de er trukket inn. Ben og grep er laget av solid, sprøytestøpt polymer; stål tverrbolt med lettgrep tommelskrue låser direkte til hvilken som helst MIL-STD 1913 Picatinny-skinne for å sikre en steinhard passform. Aksepterer GPRS1 og GPRS2 bolt-on tilbehørsskinner, tilgjengelig separat. Kan brukes på mange ikke-AR rifler og lette maskingevær med fortrekk tilbehørsskinner.
SPECS: Forsterket polymer, svart. 6¼” (15.9cm) lang med inntrukne ben. 8½” (21.6cm) høy med utslåtte ben. 13⁄8" (3.5cm) i diameter. 7 oz. (197g).
Mer...
Kundevurderinger for G.P.S. LE MODEL GRIP POD PICATINNY MOUNT 6.25-8.5" BLACK
Antall vurderinger: 11
Fra brownells.com: 11
Gjennomsnittsvurdering: 4,8
Great Product!(09.09.2010)
I love my Grip Pod. Very quick to deploy and the gun is very stable. I used a Harris bipod before getting the Grip Pod. The gun is just as easy to shoot off of the Grip Pod and it weighs much less than the Harris.
Plus, it looks cool, and that's also important!
quick, easy, and fun!(17.09.2010)
I was first issued the grip pod for a 2008 deployment to Iraq, and have now deployed twice with it. Having a single piece of gear that can fill 2 roles very well is a no brainer for most. The grip pod mounts very easily, requiring no tools, just a simple plastic wing nut that does not protrude to much. the front and back of the grip are ribbes for exrta gripping, while the sides are flat to accomodate pressure pads for light, lasers, ets. The release button for the bipods is idealy located in line with the barrel at the top of the grip, in perfect thumb position. A simple push and the two legs rapidly shoot out and spread (its great fun to "pop" the legs onto a sleeping Marine when boredon sets in!).
Now, be advised, the grip pod is rather large by other verticle for grip standards. I found the extra girth to be comforting on long patrols, and the extra length came in handy too after long hours.
I have never been a fan of bipods on patrol rifles, they always get in the way when deployed, they rattle, and if they are stowed they cannot be rapidly deployed. The grip pod solves all of these problems, as you can easily deploy with the push of a button while dropping to the prone.
As with all gear, the grip pod requires periodic dissasembly and cleaning, or the feet will not fully deploy when in a dusty environment.
All in all, an excellend piece of gear that I will gladly purchase again and would highly recomend to anyone.
It's a trade off(09.11.2009)
This is a very well made product that is durable and locks up tight.
It is a bit fat compared to most forward grips. The bipod is not adjustable. It is nice because you can set your rifle down without laying it on it's side.
While I like mine and have it on a heavv barreled AR I feel that it puts the shooter a bit high. This would create an undesirable silohette if used in a combat situation.
Bottom line it has it's purpose but it's not a real bipod and sort of a clumsy grip
Fantastic Bi-Pod(24.03.2010)
Made Like No Other! First Quality Auto Bi Pod. Very Stable and well made. Love the versatility of this product. Use it with all AR's . Would recommend over folding spring bi pod.
Great Product!(18.06.2010)
This is a well designed and sturdily constructed product. The legs deploy with a push of a button and retract simply by pushing them up into the grip. They lock automatically once they are in place. The bipod legs are steel lined and the hinge is also steel. The legs are stable when deployed, and are the correct height when shooting from the bench. The feet are wide enough to resist sinking into the ground when shooting prone. I like this product.
Combat Proven(17.07.2010)
Unlike the cheaper Knock-Offs this works. The US Army just ordered 250,000. For Police and Military, this provides an excellent shooting platform for rapid engagement from car hoods, or short walls. Not meant to compete with fold down benchrest bipods, so they shouldn't be compared to them. Durable, and sturdy.
Sturdy forward grip/ bipod(06.11.2011)
great for rapid deployment of a bipop, and to rest your rifle on the shooting bemch. it just feels sturdy in your hand, instead of some others that you can tell are just cheap.
love it(09.02.2012)
i have a grip pod on my ruger 1022 with a ATI folding stock it make the gun look and feel tuff
There is nothing like this(02.05.2012)
Only a serious Goof would give this 3 stars! This is an absulte must on a Ar 15 platform. Eliminates the need for both a BiPod and a Grip on the same weapon. Built tough and solid, quick release of BiPod is perfect. abilty to shoot while holding on to the BiPod lends itself more accurate shot, if you ever need it in a standing position this is much more comfortable intsead of grabbing barrel assembly.
A must have for AR-15 Optics(26.08.2012)
If your AR-15 has optics, then you need the Grip Pod. Your have vertical grip for quick movement and muzzle control and you have a bi-pod that allows for excellent mid to long range accuracy. This may be the moderate duty version but it is heavy, well made and very durable. I would not hesitate to take into action.
Very convenient on a tactical(12.04.2013)
This is my second grip pod. They are very ergonomic for a standing shot and work well from a bench rest. The quality is very good with the metal reinforcement.