Over 300 000 kunder - vi takker dere!

40 000+ produkter for jakt og skytesport

EGW
FN FNS, FNX VORTEX RAZOR SIGHT MOUNT

841370114382 296000701
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount does not fit: FN FNP (the slide radius is too large to allow this mount to fit) FN 5.7 Any Optics Ready Pistol
1049 1049 1 NOK
Produktnr.: 296000701
EGW SIGHT MOUNT FOR VORTEX RAZOR FN/FNS/FNX FITS C-MORE STS BLK
Produsentnr.: 49449 841370114382 Fjern enkelt baksiktet på våpenet ditt og erstatt det med EGW-festet for å montere ditt Vortex Razor, C-More RTS eller STS rødpunktsikte. Du kan når som helst ta av festet og erstatte baksiktet. Monteringsutstyr inkludert. Installasjonsinstruksjoner Fjern baksiktet* Installer EGW Sight Mount i svalehalen Stram til sett skruen (hvis aktuelt) Plasser rødpunktsiktet på EGW Sight Mount (ved å legge en liten bit papir mellom rødpunktsiktet og festet vil gjøre fjerningen enklere og vil holde Loctite unna rødpunktsiktet.) Påfør blå Loctite på de medfølgende monteringsskruene Dra til monteringsskruene til 15in/lbs Skruene som følger med dette festet krever en 5/64'' unbrakonøkkel for installasjon. Dette festet passer ikke: FN FNP (sliden er for buet til at dette festet vil passe) FN 5.7 Noen Optics Ready Pistol
1049 NOK 1 kr 1 049,00 *
Leveringstid ca. 14-21 dager.
1 stk. på lageret i USA
Spesifikasjoner: Farge: Black Make: FN Material: Aluminum Modell: FNX, FNS Number of Bases: 1-Piece Style: Tactical

Top takeaways

  1. EGW-festet erstatter enkelt baksiktet på FNX og FNS våpen for å montere Vortex Razor, C-More RTS eller STS rødpunktsikte.
  2. Monteringsutstyr og instruksjoner er inkludert, og installasjonen krever en 5/64'' unbrakonøkkel.
  3. Festet passer ikke til FN FNP eller FN 5.7, og noen Optics Ready Pistols.

Attributes

Farge: Black Make: FN Material: Aluminum Modell: FNX,FNS Number of Bases: 1-Piece Style: Tactical Leveringsvekt: 0,045kg Frakthøyde: 25mm Fraktbredde: 76mm Fraktlengde: 140mm UPC : 841370114382

Elementdetaljer

Made in USA




Oppgrader ditt FN FNS med EGW Sight Mount for Vortex Razor! 🛠️ Enkel installasjon og solid festing for optimal presisjon.

Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount does not fit: FN FNP (the slide radius is too large to allow this mount to fit) FN 5.7 Any Optics Ready Pistol
Tilbake til toppen