Faxon Firearms Pistol Compensators have been tested and confirmed compatible with the M&P 1.0 Full-Size 4.25” pistol. Compensators were not tested on, but reasonably could be compatible with the M&P 2.0 Compact 4” and Full-Size 4.25” pistol platforms. Constructed of 6061 aluminum with a black anodized finish, Faxon Pistol Compensators feature a uniquely angled front port single chamber design, enabling the compensator to improve consistency while reducing muzzle climb and recoil. The angled ports allow gas to deflect upwards as opposed to only deflecting sideways, reducing up and down muzzle movement and improving reliability. Barrel protrusion is designed to fit flush with the slide and has been optimized for Faxon branded barrels. For all other barrels, the barrel should protrude .600” or less for a flush fit. Each compensator comes complete with thread locker, two 6-32 set screws, and a 1/16 Allen wrench. SPECS Length: 1.1in Width: .9in Height:1.3in Weight: .06lbs Thread: 1/2x28 Caliber: 9mm *Compensators can affect the timing of your pistol and may require adjustments in lubrication, ammunition, and other areas. Fitment with pistols or generations other than the S&W M&P 1.0 & 2.0 Full-Size (4.25”) and 2.0 Compact (4"") barrel pistol cannot be guaranteed."
Mer...
179917991NOK
Produktnr.: 430108206 FAXON FIREARMS EXOS-514 PISTOL COMPENSATOR FOR M&P BLACK Produsentnr.: FF-P-A-COMP-DS-816341026186
1799NOK23kr 1 799,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Faxon Firearms Pistol Compensators have been tested and confirmed compatible with the M&P 1.0 Full-Size 4.25” pistol. Compensators were not tested on, but reasonably could be compatible with the M&P 2.0 Compact 4” and Full-Size 4.25” pistol platforms. Constructed of 6061 aluminum with a black anodized finish, Faxon Pistol Compensators feature a uniquely angled front port single chamber design, enabling the compensator to improve consistency while reducing muzzle climb and recoil. The angled ports allow gas to deflect upwards as opposed to only deflecting sideways, reducing up and down muzzle movement and improving reliability. Barrel protrusion is designed to fit flush with the slide and has been optimized for Faxon branded barrels. For all other barrels, the barrel should protrude .600” or less for a flush fit. Each compensator comes complete with thread locker, two 6-32 set screws, and a 1/16 Allen wrench. SPECS Length: 1.1in Width: .9in Height:1.3in Weight: .06lbs Thread: 1/2x28 Caliber: 9mm *Compensators can affect the timing of your pistol and may require adjustments in lubrication, ammunition, and other areas. Fitment with pistols or generations other than the S&W M&P 1.0 & 2.0 Full-Size (4.25”) and 2.0 Compact (4"") barrel pistol cannot be guaranteed."