Over 300 000 kunder - vi takker dere!

40 000+ produkter for jakt og skytesport

EGW
EAA SUPER SIGHT LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370114238 296000682
EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: Elite Stock II with adjustable (LPA/Bomar style, shown above) rear sight Elite Stock III with adjustable (LPA/Bomar style, shown above) rear sight Hunter with adjustable (LPA/Bomar style, shown above) rear sight Limited Custom with adjustable (LPA/Bomar style, shown above) rear sight Limited Custom Xtreme with adjustable (LPA/Bomar style, shown above) rear sight Match Elite with adjustable (LPA/Bomar style, shown above) rear sight Match Xtreme with adjustable (LPA/Bomar style, shown above) rear sight P Match with adjustable (LPA/Bomar style, shown above) rear sight P Match Pro with adjustable (LPA/Bomar style, shown above) rear sight Stock II Xtreme with adjustable (LPA/Bomar style, shown above) rear sight Stock III Xtreme with adjustable (LPA/Bomar style, shown above) rear sight This mount does not fit: EAA / Tanfoglio Witness with fixed rear sight EAA / Tanfoglio Witness with Novak style adjustable rear sight, shown above
1049 1049 1 NOK
Produktnr.: 296000682
EGW EAA SUPER SIGHT MOUNT FOR LEUPOLD DELTA POINT PRO BLACK
Produsentnr.: 49407 841370114238 EGW rødpunktsikter er ment for å installeres fra venstre mot høyre (med løpet pekende fremover). Skinnen har en progressiv konus for å tillate enklere installasjon. Fjern ganske enkelt baksiktet på våpenet ditt og erstatt det med EGW-monteringen for å montere ditt Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, eller Optima rødpunktsikte. Du kan når som helst ta av monteringen og erstatte ditt baksikte. Monteringsutstyr inkludert. Installasjonsinstruksjoner Fjern baksiktet* Installer EGW Siktemonteringen i skinnen Stram sett-skruen (hvis aktuelt) Plasser rødpunktsiktet på EGW Siktemonteringen (å plassere et lite stykke papir mellom rødpunktsiktet og siktemonteringen vil gjøre fjerning enklere og vil holde Loctite vekk fra rødpunktsiktet.) Påfør blå Loctite på de medfølgende monteringsskruene Dra monteringsskruene til med 15in/lbs Modifisering av våpenet ditt kan oppheve produsentens garanti. Dette produktet bør installeres og sjekkes av en kvalifisert børsemaker. Ingen ansvar er uttrykt eller antydet for skade eller skade som kan oppstå fra feil installasjon eller bruk av dette produktet. Denne monteringen passer til: Elite Stock II med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte Elite Stock III med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte Hunter med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte Limited Custom med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte Limited Custom Xtreme med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte Match Elite med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte Match Xtreme med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte P Match med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte P Match Pro med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte Stock II Xtreme med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte Stock III Xtreme med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte Denne monteringen passer ikke: EAA / Tanfoglio Witness med fast baksikte EAA / Tanfoglio Witness med Novak-stil justerbart baksikte, vist ovenfor
1049 NOK 1 kr 1 049,00 *
Leveringstid ca. 14-21 dager.
1 stk. på lageret i USA
Spesifikasjoner: Farge: Black Make: EAA Material: Aluminum Modell: Hunter, P Match Pro, P Match, Stock II Xtreme, Elite Stock II, Limite Custom Xtreme Number of Bases: 1-Piece Style: Tactical

Top takeaways

  1. EGW-monteringen er designet for enkel installasjon fra venstre til høyre og inkluderer monteringsutstyr.
  2. Den passer til flere EAA-modeller med justerbart (LPA/Bomar-stil) baksikte, men ikke til EAA/Tanfoglio Witness med fast baksikte.
  3. Produktet anbefales å bli installert av en kvalifisert børsemaker for å unngå skade og oppheving av produsentens garanti.

Attributes

Farge: Black Make: EAA Material: Aluminum Modell: P Match,Hunter,Stock II Xtreme,Elite Stock II,Limite Custom Xtreme,P Match Pro Number of Bases: 1-Piece Style: Tactical Leveringsvekt: 0,045kg Frakthøyde: 25mm Fraktbredde: 76mm Fraktlengde: 140mm UPC : 841370114238

Elementdetaljer

Made in USA



Oppgrader ditt våpen med EAA SUPER SIGHT monteringen for Leupold DeltaPoint Pro. ⚙️ Enkel installasjon og solid hold. Perfekt for taktiske skytinger!

EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: Elite Stock II with adjustable (LPA/Bomar style, shown above) rear sight Elite Stock III with adjustable (LPA/Bomar style, shown above) rear sight Hunter with adjustable (LPA/Bomar style, shown above) rear sight Limited Custom with adjustable (LPA/Bomar style, shown above) rear sight Limited Custom Xtreme with adjustable (LPA/Bomar style, shown above) rear sight Match Elite with adjustable (LPA/Bomar style, shown above) rear sight Match Xtreme with adjustable (LPA/Bomar style, shown above) rear sight P Match with adjustable (LPA/Bomar style, shown above) rear sight P Match Pro with adjustable (LPA/Bomar style, shown above) rear sight Stock II Xtreme with adjustable (LPA/Bomar style, shown above) rear sight Stock III Xtreme with adjustable (LPA/Bomar style, shown above) rear sight This mount does not fit: EAA / Tanfoglio Witness with fixed rear sight EAA / Tanfoglio Witness with Novak style adjustable rear sight, shown above
Tilbake til toppen