Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

TACTICAL SOLUTIONS, LLC
BROWNING BUCK MARK PICATINNY SCOPE MOUNT

879971001350 100005205

Mount A Scope & Retain Iron Sights

Lightweight, aluminum Picatinny rail replaces factory rib/rear sight and lets you mount an optic while retaining the benefit of backup “iron” sights. Eight cross-slots let you position the optic for best eye relief. Integral open rear sight adjusts for windage and elevation. Drilled to fit the factory hole spacing and use the original factory rib/rear sight screws.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Approximately 5" (12.7cm) long, 13⁄16" (21mm) wide, 15⁄32" (12mm) high from top of receiver.

Mer...

Monter en kikkertsikte og behold jernsikter

Lettvektig, aluminium Picatinny-skinne erstatter fabrikkribben/baksikte og lar deg montere en optikk samtidig som du beholder fordelen av reserve "jern"-sikter. Åtte tverrspor lar deg posisjonere optikken for best øyeavstand. Integrert åpent baksikte justeres for vindavdrift og høyde. Boret for å passe fabrikkens hullavstand og bruke de originale fabrikkribb-/baksikteskruene.

SPECS: 6061 T6 aluminium, hardcoat anodisert, matt svart. Omtrent 5" (12.7cm) lang, 13⁄16" (21mm) bred, 15⁄32" (12mm) høy fra toppen av mottakeren.

Mer...

Kundevurderinger for TACTICAL SOLUTIONS, LLC PICATINNY SCOPE MOUNT

Antall vurderinger: 3
Fra brownells.com: 3
Gjennomsnittsvurdering: 4,7

Buckmark Tactical Solutions Rail (24.02.2011)

Great fit and finish. Works Perfectly. Highly reccomended for adding optic onto Buck Mark.

Awesome Rail (02.06.2011)

I put a Burris Fastfire II on mine and I love it. It is durable and rugged.

great rail, but no fiber optic options (30.01.2013)

I ordered this rail with the intention of adding a pistol scope. For that purpose, it is superb. Great build quality, solid. The built-in rear sight is nice... but that was a problem for me. I wanted to install Williams Fire Sights (Front and Rear) on my Buckmark. The Williams Rear sights will not fit on the TacSol rail. TacSol uses it's own rear sight setup that is not compatible with the original sight. So, my original goal of scoping the Buckmark is accomplished by this rail, but my secondary goal of having fiber optic backup sights was not accomplished. As far as I can tell as of this writing (1/30/13), there are no options for a fiber optic rear sight that will fit on the TacSol rail. Apparently, someone has successfully modified a cheap SunOptics BM rail to accept the Williams rear fiber optic sight. That rail goes for $12, so I may return the TacSol rail and go with the SunOptics rail. Also, I noticed that my rings tend to slide to and fro with the TacSol rail. The rings are tightened very well such that they don't slide side to side, but they do move a tad to and fro. I don't know if that is an issue with the TacSol rail or with my rings. I'm guessing the rings, becuase they were cheap rings.
I like the rail a lot, but the proprietary rear sight is a real loser for me (not that it doesn't work, but just because fiber optics are not an option).

Les 3 flere anmeldelser fra brownells.com

1999 1999 1 NOK

Produktnr.: 100005205
TACTICAL SOLUTIONS, LLC PICATINNY SCOPE MOUNT
Produsentnr.: BMSR-INT 879971001350 Lettvektig, aluminium Picatinny-skinne erstatter fabrikkribben/baksikte og lar deg montere en optikk samtidig som du beholder fordelen av reserve "jern"-sikter. Åtte tverrspor lar deg posisjonere optikken for best øyeavstand. Integrert åpent baksikte justeres for vindavdrift og høyde. Boret for å passe fabrikkens hullavstand og bruke de originale fabrikkribb-/baksikteskruene.

1999 NOK 10 kr 1 999,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Farge: Black Make: Browning Material: Aluminum Modell: Buck Mark Number of Bases: 1-Piece Style: Picatinny

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Lettvektig Picatinny-skinne av aluminium som erstatter fabrikkribben/baksikte og muliggjør montering av optikk uten å miste reserve "jern"-sikter.
Åtte tverrspor for optimal posisjonering av optikk og integrert justerbart åpent baksikte for vindavdrift og høyde.
Produsert av 6061 T6 aluminium med hardcoat anodisering, designet for å passe fabrikkens hullavstand og bruke originale skruer.

Attributes

Farge: Black Make: Browning Material: Aluminum Modell: Buck Mark Number of Bases: 1-Piece Style: Picatinny Leveringsvekt: 0,045kg Frakthøyde: 5mm Fraktbredde: 84mm Fraktlengde: 201mm UPC : 879971001350

Elementdetaljer

Made in USA

Oppgrader din Browning Buck Mark med vår lette Picatinny scope mount 🔭. Behold jern-siktene og juster enkelt for optimal sikte!

Mount A Scope & Retain Iron Sights

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Approximately 5" (12.7cm) long, 13⁄16" (21mm) wide, 15⁄32" (12mm) high from top of receiver.

Mer...

Monter en kikkertsikte og behold jernsikter

SPECS: 6061 T6 aluminium, hardcoat anodisert, matt svart. Omtrent 5" (12.7cm) lang, 13⁄16" (21mm) bred, 15⁄32" (12mm) høy fra toppen av mottakeren.

Mer...