Lets You Adjust Gas Output For Reliable Extraction/Ejection
Steel gas block lets you adjust the amount of gas flow, so you can tune gas output for reliable extraction and ejection with different ammo types. Brass friction screw holds adjustments without thread locker and won’t mar the adjustment screw. Fits under free-float handguards on .750" O.D. barrels. Dual bottom screws secure block to barrel. Requires Allen wrench, not included.
SPECS: Steel, matte black finish. 1" (2.5cm) long. .9" (2.3cm) wide. 1-3/8" (3.5cm) high. 1.8 oz. (51g) wt.
Mer...
Lar Deg Justere Gassutslippet For Pålitelig Utdragning/Utkastelse
Stål gassblokk lar deg justere mengden av gassflyt, slik at du kan finjustere gassutslippet for pålitelig utdragning og utkastelse med forskjellige ammunisjonstyper. Messingskruen for friksjon holder justeringene uten låsevæske og vil ikke skade justeringsskruen. Passer under free-float håndbeskyttere på .750" O.D. løp. To skruer i bunnen sikrer blokken til løpet. Krever Allen-nøkkel, ikke inkludert.
SPECS: Stål, matt svart finish. 1" (2.5cm) lang. .9" (2.3cm) bred. 1-3/8" (3.5cm) høy. 1.8 oz. (51g) vekt.
Mer...
Kundevurderinger for SEEKINS PRECISION AR-15/M16 ADJUSTABLE GAS BLOCK
Antall vurderinger: 8
Fra brownells.com: 7
Gjennomsnittsvurdering: 4
All the whiz & lots of bang for the buck(12.10.2013)
I like the idea of being able to regulate the gas pressure. Great looking and nice low profile. Would not hesitate to recommend this item in particular and Brownells in general for easy shopping and very fast shipping. Thanks Brownells for the good work. Keep it up! Another satisfied repeat customer!
Fine(23.12.2013)
Have just installed and didn't find a gas tube pin enclosed. There was no separate packaging for pin so if it was in there it would easily be lost when opening package. NOTE as stated, this is STEEL, not Aluminum.
Good price, but poor set screw placement(31.01.2014)
Good price for an ajustable gas block that allows you to lock-in your gas setting without loc-tite, but I'm disappointed with this design. The brass set screw used to lock-in the gas adjustment screw faces rearward (towards the handgaurd), not towards the muzzle. On my rifle length barrel with 12" handguard, the brass screw is inaccessible once installed. Since I can't know how far to dial-in the gas control set screw prior to installation, (and since the whole reason I bought it was to be able to adjust and/or turn off the gas on my rifle for developing hand loads,) I am concerned that the tension offered by the brass set screw will lessen with multiple adjustments of the gas adjustment screw. And, at that point I will be unable to retighten the brass screw (as the instructions say to do), because I can't get at it. It's half the price of similar units, and seems like it's good quality, so I'll give it a shot and keep my fingers crossed. Also, not a big deal, but I found that the asymetrical design (one concave side) makes it a little difficult to visually center the gas tube during installation.
NOT adjustable from the front.(11.08.2015)
Works out of the box. Straight-forward installation/assembly using standard pin (not included - at least not in my package), used a Spike's mid-length gas tube and Daniel Defense lightweight 9.00" rail III. However. You can NOT adjust the gas regulator with the rail installed. This isn't apparent at first if you're just plowing along assembling a gun, nor is it clear in the description from Seekins. So, assembled, you can't access the socket-head screw to adjust the flow but you CAN lock it down with the brass set-screw. Ideally, you'd THINK anyone building these would know it's easier, more direct to access the regulator from the FRONT. Now if you are building a gun with a couple of inches of gas tube exposed, or care to take a dremel tool to your rail you can reach the adjustment screw no problem. But mine? Look for it coming to an auction site near you.
Works great if you install it correctly.(16.09.2016)
A couple of the other reviews concerned me about this block. No need for concern if it installed correctly, with the locking screw toward the muzzle. You really can't install the gas tube any other way, but it sounds like some users didn't! After talking with the manufacturer, it was clear that some users didn't know what they were doing. Installing in reverse won't work the action because the gas port in the tube is not even enclosed! Mine worked great and would recommend it to all wanting an adjustable block at a reasonable price.
The Locking Screw(12.01.2017)
The picture shows the old model with the locking screw in the rear. The new ones have the locking screw in the front which makes it much easier to access. As far as the function of the gas block, it works as you'd expect. Only time will tell if it's reliable long term.
Best adjustable gas block for the money(31.01.2018)
Very easy to install. I have this on my first AR build with a suppressor and runs great. For anyone wondering as I was, this does fit under a KMR.
Flott finish. Litt kult design, om du bryr deg om det, men toleransene er romme.(11.08.2016)
Romme toleranser fører til gasslekkasjer som gjør det vanskelig å justere den. Vel blir alt tett etter noen hundre skudd og litt loctite, men hvorfor gidde. Det finnes bedre alternativer. (PRI, JP). Jeg kjøpte den fordi den er liten nok til å gå under de fleste handguarder. Settskruen er et pluss.
Produktnr.: 100011244 SEEKINS PRECISION AR-15/M16 ADJUSTABLE GAS BLOCK Produsentnr.: 11510031811452029163 Stål gassblokk lar deg justere mengden av gassflyt, slik at du kan finjustere gassutslippet for pålitelig utdragning og utkastelse med forskjellige ammunisjonstyper. Messingskruen for friksjon holder justeringene uten låsevæske og vil ikke skade justeringsskruen. Passer under free-float håndbeskyttere på .750" O.D. løp. To skruer i bunnen sikrer blokken til løpet. Krever Allen-nøkkel, ikke inkludert.
1499NOK50kr 1 499,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Made in USA
US eksport klassifisering: 0A501.x
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Oppgrader din AR-15 med SEEKINS PRECISION justerbar gassblokk! ⚙️ Optimaliser gassflyten for pålitelig ytelse med forskjellige ammunisjonstyper.
Lets You Adjust Gas Output For Reliable Extraction/Ejection
Steel gas block lets you adjust the amount of gas flow, so you can tune gas output for reliable extraction and ejection with different ammo types. Brass friction screw holds adjustments without thread locker and won’t mar the adjustment screw. Fits under free-float handguards on .750" O.D. barrels. Dual bottom screws secure block to barrel. Requires Allen wrench, not included.
SPECS: Steel, matte black finish. 1" (2.5cm) long. .9" (2.3cm) wide. 1-3/8" (3.5cm) high. 1.8 oz. (51g) wt.
Mer...
Lar Deg Justere Gassutslippet For Pålitelig Utdragning/Utkastelse
Stål gassblokk lar deg justere mengden av gassflyt, slik at du kan finjustere gassutslippet for pålitelig utdragning og utkastelse med forskjellige ammunisjonstyper. Messingskruen for friksjon holder justeringene uten låsevæske og vil ikke skade justeringsskruen. Passer under free-float håndbeskyttere på .750" O.D. løp. To skruer i bunnen sikrer blokken til løpet. Krever Allen-nøkkel, ikke inkludert.
SPECS: Stål, matt svart finish. 1" (2.5cm) lang. .9" (2.3cm) bred. 1-3/8" (3.5cm) høy. 1.8 oz. (51g) vekt.
Mer...
Kundevurderinger for SEEKINS PRECISION AR-15/M16 ADJUSTABLE GAS BLOCK
Antall vurderinger: 8
Fra brownells.com: 7
Gjennomsnittsvurdering: 4
All the whiz & lots of bang for the buck(12.10.2013)
I like the idea of being able to regulate the gas pressure. Great looking and nice low profile. Would not hesitate to recommend this item in particular and Brownells in general for easy shopping and very fast shipping. Thanks Brownells for the good work. Keep it up! Another satisfied repeat customer!
Fine(23.12.2013)
Have just installed and didn't find a gas tube pin enclosed. There was no separate packaging for pin so if it was in there it would easily be lost when opening package. NOTE as stated, this is STEEL, not Aluminum.
Good price, but poor set screw placement(31.01.2014)
Good price for an ajustable gas block that allows you to lock-in your gas setting without loc-tite, but I'm disappointed with this design. The brass set screw used to lock-in the gas adjustment screw faces rearward (towards the handgaurd), not towards the muzzle. On my rifle length barrel with 12" handguard, the brass screw is inaccessible once installed. Since I can't know how far to dial-in the gas control set screw prior to installation, (and since the whole reason I bought it was to be able to adjust and/or turn off the gas on my rifle for developing hand loads,) I am concerned that the tension offered by the brass set screw will lessen with multiple adjustments of the gas adjustment screw. And, at that point I will be unable to retighten the brass screw (as the instructions say to do), because I can't get at it. It's half the price of similar units, and seems like it's good quality, so I'll give it a shot and keep my fingers crossed. Also, not a big deal, but I found that the asymetrical design (one concave side) makes it a little difficult to visually center the gas tube during installation.
NOT adjustable from the front.(11.08.2015)
Works out of the box. Straight-forward installation/assembly using standard pin (not included - at least not in my package), used a Spike's mid-length gas tube and Daniel Defense lightweight 9.00" rail III. However. You can NOT adjust the gas regulator with the rail installed. This isn't apparent at first if you're just plowing along assembling a gun, nor is it clear in the description from Seekins. So, assembled, you can't access the socket-head screw to adjust the flow but you CAN lock it down with the brass set-screw. Ideally, you'd THINK anyone building these would know it's easier, more direct to access the regulator from the FRONT. Now if you are building a gun with a couple of inches of gas tube exposed, or care to take a dremel tool to your rail you can reach the adjustment screw no problem. But mine? Look for it coming to an auction site near you.
Works great if you install it correctly.(16.09.2016)
A couple of the other reviews concerned me about this block. No need for concern if it installed correctly, with the locking screw toward the muzzle. You really can't install the gas tube any other way, but it sounds like some users didn't! After talking with the manufacturer, it was clear that some users didn't know what they were doing. Installing in reverse won't work the action because the gas port in the tube is not even enclosed! Mine worked great and would recommend it to all wanting an adjustable block at a reasonable price.
The Locking Screw(12.01.2017)
The picture shows the old model with the locking screw in the rear. The new ones have the locking screw in the front which makes it much easier to access. As far as the function of the gas block, it works as you'd expect. Only time will tell if it's reliable long term.
Best adjustable gas block for the money(31.01.2018)
Very easy to install. I have this on my first AR build with a suppressor and runs great. For anyone wondering as I was, this does fit under a KMR.
Flott finish. Litt kult design, om du bryr deg om det, men toleransene er romme.(11.08.2016)
Romme toleranser fører til gasslekkasjer som gjør det vanskelig å justere den. Vel blir alt tett etter noen hundre skudd og litt loctite, men hvorfor gidde. Det finnes bedre alternativer. (PRI, JP). Jeg kjøpte den fordi den er liten nok til å gå under de fleste handguarder. Settskruen er et pluss.
Hjelp og kontakt
(0) 
Nyhetsbrev
Klassisk visning
Mobilvisning