The Rubber City Armory Adjustable Gas Key enhances performance of low mass and standard mass GI systems without unnecessary disassembly. Gas flow is adjusted and maintained at the carrier with 2 set screws, one to adjust gas flow and one to lock it in place. Made from Pre-Hardened 4140: 28-32RC with radiused corners reducing sharp edges. 2 mounting bolts included.
SPECS: Made from Pre-Hardened 4140: 28-32RC.
Den justerbare gassnøkkelen fra Rubber City Armory forbedrer ytelsen til både lav masse og standard masse GI-systemer uten unødvendig demontering. Gassstrømmen justeres og opprettholdes ved bærerens nivå med 2 sett skruer, en for å justere gassstrømmen og en for å låse den på plass. Laget av forhåndsherdet 4140: 28-32RC med avrundede hjørner som reduserer skarpe kanter. 2 monteringsbolter inkludert.
SPESIFIKASJONER: Laget av forhåndsherdet 4140: 28-32RC.
Top takeaways
Justerbar gassnøkkel for AR-15/M16 som forbedrer ytelsen uten unødvendig demontering.
Laget av forherdet 4140: 28-32RC med avrundede hjørner for å redusere skarpe kanter.
Inkluderer 2 sett skruer for å justere og låse gassflyten, samt 2 monteringsbolter.
Attributes
Våpentype:AR-15
Leveringsvekt:0,009kg
Frakthøyde:16mm
Fraktbredde:57mm
Fraktlengde:102mm
Elementdetaljer
Made in USA
US eksport klassifisering: 0A501.x
Kundeanmeldelser
Kundevurderinger (3)
4,3 / 5
Klart anbefalt
Excellent Product 31.07.2015
I ordered this product for my suppressed 16" 300blk. The first time I ordered the product, it arrived with the bag cut (where the parts are) and a small piece of tape to cover it. I was missing one mounting bolt and all of the set screws. I returned it (Brownells made it right in a hurry) and received the replacement. This one had all of the pieces. The finish of the part is done well and is smooth to the touch. There aren't any instructions on how to install it but it is pretty straightforward. I thoroughly degreased the parts and placed a thin layer of red Loctite around the gas port and set the key in place. I also used a small amount of red Loctite on the mounting screws and torqued them to 58 in/lbs. I then put a quick shot of air through the key to make sure the hole was clear and let it set up for 24 hours. I did not stake it, as I was not sure if I was going to like it.
After the Loctite was good and set up, I took the gun out to the range to see how it worked. I am shooting 110gr Varmageddons with 19.5gr of W296, at about 2400 ft/s (Carbine gas) and an AAC Cyclone suppressor. I started with the set screw all the way in the closed position and placed one round in the magazine and fired. To my surprise the case was ejected at about 3-4 o'clock and about 5 feet away. The bolt did not lock back. I tried this several more times with the same result so it doesn't appear that one would be able to shut the gas all the way with a supersonic load. Recoil was drastically reduced from how the gun ran previous, which would slam the bolt back hard and throw brass directly behind me and over 20 feet away.
I backed out the adjustment screw 1/2 a turn and repeated. Same ejection and recoil, no bolt lock back. Another 1/2 turn, and the bolt locked back. I backed the screw out another 1/4 turn and put the locking screw in on top of it (no Loctite). I then fired the weapon approximately 30 times and checked the set screws. There was 0 movement but time will tell whether I will need to put some blue Loctite on or not.
Overall this is a good product. It is easy to adjust and comes with one extra set screw and one adjustment wrench. It does come with a little Rubber City Armory logo decal. It is very cheap looking but that is not really a big deal.
Now some may be concerned with where the gas goes. It goes in the receiver as my gun was a little dirtier than normal after the small amount of firing that I did. This did not affect how the rifle ran, as I had no malfunctions. Now I will go ahead and get those screws staked in.
Anbefalt med reservasjoner
Great Idea. 09.04.2015
Gas control screws had to be reset repeatedly.
Even with the set screw there were problems keeping it where I wanted it. Once it was adjusted the adjustment changed when you tightened the locking screw.
Klart anbefalt
seems to work as intended.... 03.04.2015
I was skeptical about this but wanted to give it a try...overall I'm impressed. My pinned carbine's barrel came with an oversized gas port it seems and I was having all the signs of over gassing(case head swipe, 12-1PM ejection, harsher recoil, mid case dents, etc) on every type of ammo I tried. Installed the ADIGS and now I have no swiping, dents, recoil is softer and ejection is consistently at 4PM with all ammo I've tried. I am writing this after about 1000 rounds through it because I wanted to give an accurate review and see how it did, I really liked it! I have only adjusted it once and hasn't moved in the last 1k rounds. This is a good option for those with a pinned/welded barrel.
Vi opplevde en feil under innlasting av dette innholdet. Vennligst last inn siden på nytt for å fortsette. Hvis problemet vedvarer, ta kontakt med kundeservice.
Forbedre ytelsen til AR-15 med Rubber City Armory Justerbar Gassnøkkel 🔧. Enkel justering uten demontering. Kvalitet og presisjon i ett!
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Precision Reflex Gas Buster ladegrep beskytter skytteren ved å avlede gass, olje og rusk bort fra ansiktet.
Konstruert av 7075 T6 aluminiumslegering med ekstra metall på stresspunkter for å motstå vridning eller brudd.
Tilgjengelig i tre konfigurasjoner: Flat Latch, Militær Big Latch og Combat Latch, alle designet for pålitelig og rask betjening.
Høykvalitets erstatningsfjærer med presise toleranser for AR-15/M16.
Tilgjengelig i 3-pakker, flott som nødreserver eller til å sette sammen en deler-rifle.
Materialer og overflatebehandling minst like gode som OEM-deler, inkludert kromsilikonfjærer (CS).
JP Enhanced Gas Rings gir en perfekt balanse mellom solid gassforsegling og lav friksjon, noe som øker riflens pålitelighet.
Designet med ett stykke ligner på Mcfarland-ringer, men er presisjonsslipt for å passe nøyaktig til DPMS-mønstrede bærergruppekomponenter.
Ringenes syklusbevegelse hjelper med å fjerne smuss ved hvert skudd, og passer til DPMS LR-308 eller AR15 rifler.
Hjelp og kontakt
Nyhetsbrev
Klassisk visning
Mobilvisning