Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

CLARK CUSTOM
1911 DROP-IN COMPENSATOR KIT

181165000

Drops Right In & It's Ready To Work

No fitting or gunsmithing required to get the increased muzzle control and accuracy of Clark's dual-port compensators and match-grade barrel. Comp helps control recoil and muzzle flip for improved accuracy and a faster follow-up shot. Match-grade, button-rifled barrel and pre-fit bushing provide a close fit on most slides for increased accuracy, function and reliability.

SPECS: Steel, blued. Kit includes: 5½" (14cm) barrel, threaded .580"-40 tpi, .45 ACP; blued comp; barrel bushing; .278" c-to-c link and pin. Increases pistol length by 1½" (3.8cm). Fully chambered.

Mer...

Faller rett på plass og er klar til bruk

Ingen tilpasning eller børsemakerarbeid er nødvendig for å oppnå økt munningskontroll og presisjon med Clarks dobbel-port kompensatorer og match-grade løp. Kompensatoren hjelper med å kontrollere rekyl og munningsvipp for forbedret nøyaktighet og raskere oppfølgingsskudd. Match-grade, knapp-riflet løp og forhåndstilpasset bøssing gir en tett passform på de fleste sleider for økt nøyaktighet, funksjon og pålitelighet.

SPECS: Stål, blånet. Kittet inkluderer: 5½" (14cm) løp, gjenger .580"-40 tpi, .45 ACP; blånet kompensator; løpsbøssing; .278" senter-til-senter lenke og pinne. Øker pistollengden med 1½" (3.8cm). Fullstendig kamret.

Mer...

Kundevurderinger for CLARK CUSTOM .45 COMP KIT

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,6

Not exactly drop-in, love the kit though (11.08.2010)

I ended up bringing my gun into a local shop, after I installed the compensator and my gun repeatedly jammed. The shop ended up sending it off to Springfield. Two months later my gun is ready,a lighter spring was needed after adding the compensator. My gun is very tight and still has not shot more than 1000 rounds through it so a older pistol might not have the same problem.
Picking up a lighter spring might not be a waste of time when getting this.

love it (02.03.2012)

the barrel dropped right in, went together smoothly, I had to use a 2 piece guide rod.

as far as shooting, this thing is amazing. no muzzle rise, less felt recoil. less than a 9mm.

Doesn't need 2 pc. guide rod (01.07.2012)

I've used these comp kits over a dozen times for customers and my own guns and they don't need a guide rod at all. Guide rods cause more problems than than fix. Stick to John Browning's design with a short style guide rod and to disassemble the gun just pull back the slide and remove the slide stop first, then pull the upper half off the lower 1/2 as an assembly. Then it's simple to remove the spring and guide, then pull the barrel forward about an inch, rotate the bushing, remove the spring plug, then the barrel and comp. assembly. So much easier than messing with a guide rod, just ask a gunsmith!

Best 1911 barrel so far. (16.02.2013)

I put this barrel in my Colt 1911 100 years service, and this Clark barrel shoots better than the colts..alot better!.. All my shots are in the bulls eye!.. wow..never thought a barrel could be that accurate..Thanks Clay from Clark Custom Guns..

Better than expected (25.02.2013)

I was looking for a way to customize my SA stainless Loaded/Combat and VERY happy with this kit. The comp looks great on the gun and the accuracy and recoil reduction are amazing. The comp does make assembly a bit troublesome but a good technique solved that problem. I'm only disappointed that I didn't have more rounds to "test" with.

Quality barrel, easy to install. (04.04.2015)

A high quality match barrel and compensator. I installed this on an old worn out race gun that was a home build. Previous barrel and bushing were undersized with a lot of play. The Clark kit dropped right in on a slightly oversized slide (most everything is drop in) everything fit snug with no fitting required and the surface of the barrel is nice and polished and the compensator is just a hair over the diameter of a .45 bullet making it very efficient at mitigating recoil. On a 1911 with tighter tolerances this would most certainly require fitting and a lighter recoil spring will increase the reliability with this barrel but it is a high quality, easy to install upgrade for anyone doing target or competition shooting.

My Drop in Barrel from Clark (03.04.2017)

Barrel dropped right in and no fitting issues. Link was great with the lock up and movement. I choose this with the compensator for a friend who wanted one for competition and is extremely pleased with it and his ability to stay on target. Would buy another when I need another as this, buy with confidence.

Les 7 flere anmeldelser fra brownells.com

3527 3527 1 NOK

Produktnr.: 181165000
CLARK CUSTOM .45 COMP KIT
Produsentnr.: CLK16545 Ingen tilpasning eller børsemakerarbeid er nødvendig for å oppnå økt munningskontroll og presisjon med Clarks dobbel-port kompensatorer og match-grade løp. Kompensatoren hjelper med å kontrollere rekyl og munningsvipp for forbedret nøyaktighet og raskere oppfølgingsskudd. Match-grade, knapp-riflet løp og forhåndstilpasset bøssing gir en tett passform på de fleste sleider for økt nøyaktighet, funksjon og pålitelighet.

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Barrel Weight: .42 lbs Finish: Blued Kaliber: 45 Auto (ACP) Make: 1911 Modell: Government Pipelengde: 5.5'' Style: Drop-In

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Vilkår for kjøp

Krav til kjøpetillatelse eller våpenkort og legitimasjon dersom kjøper har våpen i samme kaliber. (Original kjøpetillatelse må sendes pr post. Ordre blir ikke effektuert før kjøpetillatelse eller annen dokumentasjon foreligger))

Top takeaways

Ingen tilpasning eller børsemakerarbeid nødvendig for å oppnå økt munningskontroll og presisjon med Clarks dobbel-port kompensatorer og match-grade løp.
Kompensatoren hjelper med å kontrollere rekyl og munningsvipp for forbedret nøyaktighet og raskere oppfølgingsskudd.
Kittet inkluderer 5½" løp, gjenger .580"-40 tpi, .45 ACP; blånet kompensator; løpsbøssing; .278" senter-til-senter lenke og pinne.

Attributes

Barrel Length: 5.5'' Barrel Vekt: .42 lbs Cartridge: 45 Auto (ACP) Finish: Blued Make: 1911 Modell: Government Style: Drop-In Leveringsvekt: 0,159kg Frakthøyde: 8mm Fraktbredde: 94mm Fraktlengde: 213mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.c

Opplev forbedret munningskontroll med 1911 DROP-IN COMPENSATOR KIT! 🎯 Ingen tilpasning nødvendig for økt presisjon og raskere oppfølgingsskudd.

Drops Right In & It's Ready To Work

Mer...

Faller rett på plass og er klar til bruk

Mer...

Kundevurderinger for CLARK CUSTOM .45 COMP KIT

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,6

Not exactly drop-in, love the kit though (11.08.2010)

love it (02.03.2012)

the barrel dropped right in, went together smoothly, I had to use a 2 piece guide rod.

as far as shooting, this thing is amazing. no muzzle rise, less felt recoil. less than a 9mm.

Doesn't need 2 pc. guide rod (01.07.2012)